Industrial dust pulse bag filter, size and type, multi tube desulfurization and environmental protection equipment accessories, manufacturer direct sales

Bag filter is a dry dust filtering device. It is suitable for capturing small, dry, non fibrous powders
Dust. The filter bag is made of woven filter cloth or non-woven felt, utilizing the filtering effect of fiber fabric to
Filter the dust containing gas, and when the dust containing gas enters the belt filter, the powder with large particles and high specific gravity will be removed
Dust, due to the action of gravity, settles and falls into the ash hopper, while gases containing smaller dust particles pass through
When using filter media, dust is trapped to purify the gas.

Dry desulfurization and dust collector, using dry dust removal, activated carbon to adsorb SO2, with a complete system design, attached
The equipment is fully equipped and has high purification efficiency. Widely used in industries such as boilers, kiln flue gas, etc
purify. The dry desulfurization and dust collector consists of two parts: dust removal and adsorption. Ceramic multi tube dust removal is used for dust removal
Dust collector, the flue gas containing dust and sulfides first enters the dust removal section, and the flue gas after dust removal enters the desulfurization section
For the sulfur part, activated carbon adsorption is used for desulfurization. The flue gas enters the activated carbon adsorption zone and utilizes the adsorption of activated carbon
By attaching the ability, the flue gas comes into contact with activated carbon, and SO2 in the flue gas is adsorbed on the surface of the activated carbon,
Separate it from the gas, and the adsorbed clean gas is discharged through the adsorption unit to the air outlet. With suction
As the operating conditions continue, the accumulation of SO2 molecules on activated carbon particles will increase, leading to a corresponding increase
The operational resistance of the equipment.

1、 Technical parameters
1. Dust collector efficiency: ≥ 95%
2. Desulfurization efficiency: 60-70%
3. Dust concentration: ＜ 200mg/m3
4. Ringman Blackness:<Level 1
5. Resistance:<1200Pa

2、 Instructions for use
When the desulfurization and dust removal equipment leaves the factory, it includes the dust collector body, desulfurization bed, and ash hopper. Install first
Connect the main body to the flange of the ash hopper bracket, place the desulfurization bed on top of the main body, and connect the outlet
The flange is sufficient, install the water tank according to the instructions.
2. The installation and arrangement of desulfurization blocks should be tight and orderly.
3. After installing the water tank, water injection debugging should be carried out until the water level reaches the overflow port and water overflows.
4. Each flange should be sealed and a system air tightness check should be conducted.
5. During continuous operation, ash should be discharged on time, usually once every four hours.
6. The user unit should strengthen management, conduct regular inspections to prevent leaks, and solve problems in a timely manner
Dry desulfurization multi tube dust collector maintains good operating condition.
7. The replacement time for desulfurization blocks is generally twice a year for heating furnaces and four times a year for industrial furnaces,
To ensure the desulfurization effect.

Pulse bag dust removal efficiency is high, generally reaching over 99%. Stable performance. Handling air volume
The changes in working conditions such as gas dust content and temperature have little effect on the dust removal efficiency of bag filters.
Bag filter is a dry purification equipment that does not require water, so there is no need for sewage treatment or mud
Dealing with problems, the collected dust is easy to recycle and reuse. The structure is relatively simple and the operation is relatively stable
Less initial investment and easy maintenance.

PRODUK

Silakan tinggalkan informasi Anda dan kami akan menghubungi Anda.